B&W Reversal Kit
B&W Reversal Kit
This kit provides you with all the additional chemicals to process Black and White Slides.
You will need to have the Basic Chemistry for Black and White Negatives in addition to this kit. Including Black and white Developer (preferred Developer is HC-110 or Similar Highly active developer) and Fixer which can be optional depending on Film Used. Available in 1L, 2L and 5L Versions which contain multiple 1L Solution kits.
Each Kit Contains :
Sample Slide and Instructions
1x Bleach Part A 1L
1x Bleach Part B 1L
1x Clearing Bath 1L
Bleach Neutraliser
MFS B&W 200 Reversal Film (Left) HP5+ Shot at 200 (Right) -Developed in 1+14 HC110 24C 12 Min
MFS B&W 200 Reversal Film. Developed in 1+14 HC110 24C 12 Min
Almost 20 Yr Expired Tmax 100 120, Shot at Iso 50 Developed in 1+14 HC110 24C 16 Min
Recommended Equipment
3x 1L Glass Bottles for Storage
1L Glass Beaker For Mixing Working solution
Funnel
Gloves and Eye Protection.
3L-5L of Distilled or Deionised Water
Recommended Tested Developers
Kodak HC-110
Ilford Universal PQ
Recommended Standard Films
HP5+ shot at 200
Fomapan 400 Shot at 200
Delta 100
Bleach Mixing
This is a 2 Part kit that will Create 1L of Each part, and then mixed together right before use.
Mix and Store Part A and Part B solutions in separate Glass Containers. As Separate solutions these have a very long shelf life.
Add Bleach part A to 800ml of Distilled Water and then Make up to 1L Solution (Purple)
Add Bleach part B to 800ml of Distilled Water and then Make up to 1L Solution (Clear)
To create a working solution, add Equal Parts of each solution together. This solution should be discarded after use. Use within 4 Hrs Recommended.
Warnings
Bleach Part B is Acidic wear Gloves and eye Protection and avoid contact with skin. Follow all standard safety Procedures when working with Acids
Bleach Part A will STAIN, avoid contact with skin and clothing. In powdered form it is very fine be careful when opening package and do so in a contained area. Wipe down area with a wet cloth to check for spills.
Mix Clearing bath in a ventilated area and avoid inhaling. Produces a foul odour when mixed with water.
Follow all standard safety precautions when developing film and using chemicals.
Dispose of all Chemicals in accordance with Local Regulations.